Personnel Administration Actions HR_PA_310 Use the Forward button

Personnel Administration Actions HR_PA_310 Use the Forward button below ( ) to advance through the slides. HR_PA_310 Personnel Administration Actions 1 Prerequisites and Roles Prerequisites UK_100 IRIS Awareness & Navigation HR_200 Human Resources Overview

HR_PA_300 Personnel Administration If you have not completed all of these prerequisite courses, please do so prior to taking this course. Roles This course is primarily intended for departmental Business Officers and Personnel Administrators responsible for performing various Personnel Administration (PA) HR_PA_310 Personnel Administration Actions Actions in SAP/IRIS. 2 Course Content

Introduction Unit 1 Personnel Administration Actions Unit 2 Additional PA Action Infotypes Unit 3 Payroll Authorization Record (PAR) Course Summary HR_PA_310 Personnel Administration Actions 3 Course Learning Objectives Review terms and concepts associated with Personnel

Administration (PA) Actions as it relates to the University of Kentucky Gain an understanding of and be able to perform a few, key PA Actions NOTE: This course will not cover all of the PA Actions available in the system. The Quick Reference Cards (QRCs) with information and instructions for completing all PA Actions are available on the myHelp web site: http://myhelp.uky.edu/rwd/HTML/HR/HR_PA_310.html. HR_PA_310 Personnel Administration Actions 4 myHelp Web Site for HR_PA_310 PA Actions Click here to access the printable version of these course slides. Click on any of the Related Quick

Reference Cards (QRC) links to view the process information and instructions for completing that transaction/Action. HR_PA_310 Personnel Administration Actions 5 Check for Understanding The Check for Understanding is a series of questions which will be presented at the end of each unit. You must successfully pass a units Check for Understanding before proceeding to the next unit.

To complete: 1. Click on the radio button next to your answer 2. Click on the Next button 3. Repeat Steps 1 & 2 for each question 4. After answering all of the questions, click on the Submit All or Submit All Answers button 5. Upon passing, click on the Finish button to continue to the next unit in the course

HR_PA_310 Personnel Administration Actions 6 Introduction HR_PA_310 Personnel Administration Actions 7 Key Terminology The following are key terms used throughout this course. Terminology Definition Action A series of infotypes that automatically appear in a logical order for data entry to complete an HR process.

Payroll Authorization Record (PAR) The paperwork summarizing the data entered in a PA Action. Delimit A process to End (but not delete) an infotype record by shortening its validity period. Payroll Area Used to group employees with the same payroll cycle and to determine payroll periods. Also defines the frequency with which an employee is paid. (Monthly or Biweekly) HR_PA_310 Personnel Administration Actions 8

Key Terminology (Continued) Terminology Definition Organizational Unit Any type of organizational entity found at the University, such as a College, Division, Department, etc. It is identified with an 8digit number starting with a 3. (Ex: 30000358 - College of Medicine) Position Describes individual employee placements or assignments in the University. It is identified with an 8-digit number starting with a 5.

(Ex: 50128809 - Staff Support Associate II) Employment Percent Indicates an employees FTE (Full Time Equivalency), based on either a 40 or 37.5 hour work week. (Ex: A Regular, Full-time employee working 40 of 40 hours is 100% FTE) HR_PA_310 Personnel Administration Actions 9 Key Terminology (Continued) Terminology Definition

Person ID A unique 8-digit number assigned to an employee by IRIS during the New Hire Action. To be used for identification purposes instead of the Social Security Number, although a search using the SSN is still possible. (PID) This number will NOT change. Each personnel assignment is uniquely identified in IRIS by the PerNr (pronounced Per-Ner). Generally, the same PerNr is Personnel Number retained when employees change assignments, but another PerNr is (PerNr) established for each additional assignment. This number MAY change. HR_PA_310 Personnel Administration Actions

10 Person ID & Personnel Number If an employees records were converted to IRIS when the HR module went live (April 1, 2006), the Person ID will begin with a zero (0), and the PerNr will be the same as the Person ID. Example: George Smithfield Person ID=00012879 and PerNr=00012879 Any employee hired after go-live will have: a Person ID that begins with a one (1), and a PerNr that begins with a one (1), but it will not be the same as the Person ID. Example:

Agnes Witherspoon Person ID=10025645 and PerNr=10011498 HR_PA_310 Personnel Administration Actions 11 Person ID & Personnel Number (Continued) These numbers can be seen at the top of a completed PA Actions screen (as well as some of the other HR transactions, such as PA20 and PA30). Person ID Personnel Number (PerNr)

Position Number (starts with a 5) HR_PA_310 Personnel Administration Actions 12 Personnel Administration (PA) Actions Business Officers and Personnel Administrators select PA Actions via transaction PA40 to carry out processes that change individual assignments. Some example PA Actions: New Hire/Rehire Additional Assignment Transfer

Separation PA Actions are carried out through a series of infotypes that appear automatically in a logical order, prompting the user to enter and save data as required. HR_PA_310 Personnel Administration Actions 13 PA Actions (Continued) Once a PA Action is completed, two Payroll Authorization Records (PAR) must be generated, printed, signed, and sent to HR Compensation along with one copy of the PAR and all supporting documentation. (Further information and instructions on processing a PAR will be covered in the Payroll Authorization Record (PAR)

unit later in this course.) HR_PA_310 Personnel Administration Actions 14 IRIS Payroll Schedule The Payroll Schedule will be helpful in processing Actions. This can be found and printed from Payrolls web site: http://www.uky.edu/EVPFA/Controller/payroll.htm For example: The first column on the left indicates the deadline when PARs and supporting documentation need to be received in HR Compensation for the pay period in which a PA Action

is processed. So, if a Biweekly New Hire Action is processed with a Start date of 2/13/11, then the PARs and documents must be in Compensation by 5:00 PM on 2/23/11. HR_PA_310 Personnel Administration Actions 15 Validity Dates Each infotype record created during a PA Action has a start (From) and end (To) date to identify its validity period. For example: While processing a PA Action, the Start date indicated on

the initial PA40 screen will copy over as the From date on each infotype record that appears (except for Personal Data (0002), which will be the employees date of birth). Records will always default with an end (To) date of 12/31/9999, often referred to as the high date. Do NOT change these dates once you are past the initial PA40 screen and into the infotypes! HR_PA_310 Personnel Administration Actions 16 Validity Dates (Continued) Some PA Actions will delimit existing infotype records, and new records will be created with new/updated data. A Warning Message will appear in the Status Bar for each infotype record being delimited. For example:

Press the Enter key to acknowledge and move past the message. The system will automatically change the To date on the delimited record to the day before the Start date of the new record. HR_PA_310 Personnel Administration Actions 17 Security in IRIS-HR HR security roles in Production allow you to view HR data within your area of responsibility only. Access is limited to infotypes needed to fulfill your role. Example: You may have access to an employees HR master data within your organizational unit, but not to

certain Benefits or Payroll infotypes, such as Health Plans (0167) or Bank Details (0009). Access also may be limited to Display Only, such as Residence Status (0094). In the Training Sandbox, you may be able to view more infotypes than you will in Production. You can search for any employee in IRIS if you are hiring, such as for a transfer or an additional assignment. HR_PA_310 Personnel Administration Actions 18 Introduction Check for Understanding HR_PA_310 Personnel Administration Actions 19

HR_PA_310 Introduction PROPERTIES On passing, 'Finish' button: On failing, 'Finish' button: Allow user to leave quiz: User may view slides after quiz: User may attempt quiz: Goes to Next Slide Goes to Previous Slide After user has completed quiz At any time Unlimited times Unit 1 Personnel Administration Actions HR_PA_310 Personnel Administration Actions 21

PA Actions Overview Personnel Administration Actions are carried out through a series of infotypes that appear automatically in a logical order, prompting the user to enter and save data as required. Some Actions may have several infotypes to be completed. For example: New Hire and Additional Assignments. Some Actions may have a small number of infotypes to be completed. For example: Position Update and Separation. Regardless of the Action Type, the majority of the time when an infotype is presented, you will do the same

thing on that infotype. Meaning, you will complete the same fields and save, or you will just press Enter let the system populate certain fields and/or validate the data on the screen, etc. HR_PA_310 Personnel Administration Actions 22 PA Actions Overview (Continued) The infotypes covered in this unit and the instructions given for each are based on processing a New Hire Action, which contains the majority of infotypes you will encounter when processing any PA Action. There are a few additional infotypes which may or may not be presented during various PA Actions that will also

be addressed in the next unit in this course. For some PA Actions there will be exceptions to the instructions on completing an infotype from what is presented in this unit! These are addressed on the Quick Reference Cards (QRC) on the myHelp web site, http://myhelp.uky.edu/rwd/HTML/HR/HR_PA_310.ht ml. HR_PA_310 Personnel Administration Actions 23 myHelp Web Site for HR_PA_310 PA Actions Click on any of the links to open the corresponding QRC. For example: HR_PA_310 Personnel Administration Actions 24

PA Actions Transaction PA40 Transaction PA40 is used to process PA Actions. The Object Manager portion of the screen is typically used for system searches. Even though you will be searching the system for people during various Actions, do not use the Object Manager. Object Manager To hide the Object Manager, Select DO NOT

USE! Settings Hide Object Manager in the Menu Bar. HR_PA_310 Personnel Administration Actions 25 PA40 Tips Always start a PA Action with a clear screen. If an employees information from a previous PA Action is seen in the top portion of the screen, delete the Person ID and press the Enter key to clear this information. Do NOT use the Back icon

while working on a PA Action. Using the Back icon will leave the PA Action unfinished. The icon may be used once a PA Action is completed. After completing each infotype but before saving, always press the Enter key and check the Status Bar for any system messages that might need to be addressed. HR_PA_310 Personnel Administration Actions 26 PA40 Initial Screen 1. As for completing the Person ID and Start fields, refer to the instructions on the appropriate QRC on the myHelp-HR Help web site. Key tip: Do not enter a Person ID when executing the Main Campus Create Assignment or Hospital Create Assignment Action Type for any of the following: New Hire/Rehire/Reinstate Position Change (Promotion, Transfer, etc.) Additional/Overload Assignment

2. Click on the gray selection box next to the appropriate Action Type. 3. Click on the Execute icon. HR_PA_310 Personnel Administration Actions 27 Employee Recognition Window Whenever the Person ID field is left blank, the Employee Recognition window will appear. Enter the employees Last/First Name, then click on the Continue icon. If the employee is not found, the Query window will appear. Click on the New Employee button, and the system will guide you through the New Hire Action.

HR_PA_310 Personnel Administration Actions 28 Employee Recognition Window (Continued) If the employee is found and is in an Active status, double-click on their name to select. Then you will choose the appropriate option on the New Work Relationship window and click on the green Continue icon. HR_PA_310 Personnel Administration Actions 29

Employee Recognition Window (Continued) If the employee is found and is in a Withdrawn status, double-click on their name to select. Then you will choose the appropriate option on the New Work Relationship window and click on the green Continue icon. HR_PA_310 Personnel Administration Actions 30 Actions (0000) Although the cursor defaults in the Pers No. field, do not ever enter a value. The system will automatically

populate the Personnel Number. Also, once you are into a PA Actions infotypes, do not ever change the Start or to dates at the top of the screen. The Start date defaults to the Start date indicated on the initial PA40 screen, and the to date will always default to the high date (12/31/9999). HR_PA_310 Personnel Administration Actions 31 Actions (0000) (Continued) Always select the appropriate Reason for Action. Click on the Possible Entries icon to display the list of

available reasons, then double-click to select. Enter/verify the Position number, then press Enter. HR_PA_310 Personnel Administration Actions 32 Actions (0000) (Continued) If a Position number is entered, the following dialog box will appear: Click on the green Continue icon or press Enter. This will automatically populate several fields on some of the

infotypes with default attributes from the positions master data (transaction PP01). For example: Check the Status Bar for any system messages. Once it reads , click on the Save icon to complete this infotype and continue. HR_PA_310 Personnel Administration Actions 33 Personal Data (0002) Enter the employees Name, SSN, Birth date; select the appropriate Gender; and press Enter. Ensure the Name information is entered exactly as it is seen on the employees Social Security card.

Use proper capitalization and double-check spelling. The Suffix field is used to indicate Jr., Sr., I, II, etc. Do not enter this in the Last name field. Note: Upon pressing Enter, the Start date will temporarily change to the employees Birth date. DO NOT CHANGE IT! It will return to the original Start date of the PA Action on the next infotype. HR_PA_310 Personnel Administration Actions 34 Personnel Data (0002) (Continued)

(Optional) Specify the employees Marital Status. If you choose Married, the system will display the Family Member/Dependents (0021) infotype. (See next slide for more on this infotype.) Check the Status Bar for any system messages. Once it says , click on the Save icon to complete this infotype and continue. HR_PA_310 Personnel Administration Actions 35 Family Member/Dependents (0021)

Enter the Spouse information (if known). The Last name will default to the same as the employee, but may be changed if necessary. Click on the Save icon to complete this infotype and continue. Note: If this information is not known, click on the Next Record icon to skip this infotype and move on to the next infotype. HR_PA_310 Personnel Administration Actions

36 List of Students Matching Employee Data This window will appear immediately after saving the Personal Data (0002) infotype. The system is checking the SLCM module of IRIS to see if there is an existing student with identical personal data. DO NOT CLOSE THIS WINDOW by clicking on the X in the upper-right corner! Doing so will assign the employee an invalid Person ID (i.e. ?_11046666). If this happens, contact HR Compensation to have the Action deleted, then process the entire Action again. HR_PA_310 Personnel Administration Actions 37 List of Students Window

(Continued) If any Matching Students are found and your employee is listed, double-click on their Student ID (StudentNo.) and the system will assign that as their Person ID in the HR module. If any Matching Students are found but your employee is NOT listed, click on the New Student button click on the Search Student button ; or if you know there should be a student record listed, change the search criteria, and click on the Find icon.

HR_PA_310 Personnel Administration Actions 38 List of Students Window (Continued) If no Matching Students are found, you will still get this window. Click on New Student if youre confident the employee is not already a student in SLCM; or Click on Search Student if you know there should be a student record listed, change the search criteria, and click on the Find icon. HR_PA_310 Personnel Administration Actions

39 Organizational Assignment (0001) Simply press Enter on this infotype. The system will populate the fields with the default values based on the Position number. Do not change the Percentage value. Check the Status Bar for any system messages.

Once it says , click on the Save icon to complete this infotype and continue. HR_PA_310 Personnel Administration Actions 40 Addresses (0006) Permanent Residence Enter the home address information, County of residence and any other known information, and press Enter. The Mail code (org unit) indicates where the

employees pay stub will be directed to. The Privacy Flag, if checked, prevents the address from being published in the Enter the City University directory. only. The County of Employment is used primarily by the College of Agriculture, but can be used by others if desired. Click on the Save icon to complete this infotype and continue. HR_PA_310 Personnel Administration Actions 41 Addresses (0006) Work Address

Enter the employees work address information, if known. Use the Next record icon to skip, if unknown. Other types of numbers can be entered, but are not required. Click on the Possible Entries icon to select a Type, then enter the Number. Click on the Save icon to complete this infotype and continue. Note: The employee can maintain this address through the myUK Employee Self-Service tab, but this will create

a starting record.HR_PA_310 Personnel Administration Actions 42 Planned Working Time (0007) Press Enter to populate the values in this infotype. Verify the data (see the next slide for more information). Check the Status Bar for any system messages. Once it reads , click on the Save icon to complete this infotype and continue. HR_PA_310 Personnel Administration Actions 43

Planned Working Time (0007) (Continued) The Employees Personnel Subarea must be consistent with the Employment percent or an error message will appear. The Employment percent always defaults to 100.00 when the Enter key is pressed. This can be changed in order to fall within the required employment percentage range stated in the error message. (See next slide for chart.) HR_PA_310 Personnel Administration Actions 44 Employment Percentage Chart

This chart shows the allowed percentage(s) for each Personnel Allowed FTE PSA Code PSA Text Subarea (PSA). 1.0 FTE = Employment Percentage 0001 Reg FT 0002 Reg PT (Faculty)

.20 - .99 0003 Reg PT >.74 .75 - .99 0004 Reg PT .5 to .74 .50 - .74 0005 Reg PT .2 to .49 .20 - .49 0006 Temp FT

1.0 0007 Temp PT >.20 .20 - .99 0013 Temp PT <.20 < .20 0008 WEPP Always .60 0009

Reg On Call Always .20 0010 Prem On Call Always .20 0011 Unpaid n/a 0012 Non-Service n/a HR_PA_310 Personnel Administration Actions

45 Basic Pay (0008) Enter the Amount (Hourly Pay Rate, Monthly Salary, or Biweekly Salary). Press the Enter key to populate the Annual Salary field. Click on the Save icon

to complete this infotype and continue. HR_PA_310 Personnel Administration Actions 46 Basic Pay (0008) (Continued) The Annual and True Annual Salary fields should be the same for all employees, except for 9 and 10-month deferred Faculty. Their actual, contracted, annual salary will be seen in the True Annual Salary field. The Override Salary field is used in one of two ways: If an employee is in an acting position and the

department is not paying benefits on the additional acting money, they can enter an Override Salary amount to bring it back down to the pre-acting pay; or If an employee is in a flex leave position and does not work during the summer months, the Override Salary may be used to reduce the annual salary that is reflected. The impact is on basic and optional life insurance coverage. HR_PA_310 Personnel Administration Actions 47 Date Specifications (0041) Verify that the information on this infotype is correct and click on the Save icon

to continue If the information is incorrect, contact HR Compensation. Do not change it yourself please! HR_PA_310 Personnel Administration Actions 48 Additional Person Data (0077) Select the employees Ethnicity, and then click in the checkbox next to the appropriate Race Category. If the Hispanic/Latino Ethnicity is selected, a Race Category is not required. If the Not Hispanic/Latino Ethnicity is selected, a Race

Category must also be selected. Multiple race categories may be selected as appropriate. Complete the Military and Veteran Status sections, if known. Click on the Save icon to complete this infotype and continue. HR_PA_310 Personnel Administration Actions 49 Additional Person Data (0077)

(Continued) If the Veteran Status section is not completed, the following message will appear. Click on the green checkmark to accept and continue. Note: This infotype is required and must be completed. If the record is missing or incomplete, the employees record will not be unlocked for payroll processing until it has been completed! HR_PA_310 Personnel Administration Actions 50 Completed PA Action Upon completing and saving the last infotype for a PA Action, the system will return to the Personnel Actions screen. The Action is completed!

Tip: Write down the employees Personnel Number and the Start date! This information is needed for generating the PAR, which is the next step in the process. HR_PA_310 Personnel Administration Actions 51 Recovering from an Interruption Should you ever be returned to the initial PA40, Personnel Actions screen prior to completing a PA Action, use the steps listed on the next slide to recover from the interruption. A couple possible reasons for the interruption: The power goes out to your PC. You accidentally click on the Back icon

. For a New Hire Action: You can recover if the first three infotypes were completed and saved: Actions (0000), Personal Data (0002), and Organizational Assignment (0001). If only part of these three infotypes were completed and saved, contact HR Compensation for assistance. HR_PA_310 Personnel Administration Actions 52 Recovering from an Interruption To recover from an interruption while processing a PA Action in PA40:

1. Enter the employees Person ID. 2. Enter the same Start date used previously. 3. Select the same Action Type used previously. 4. Click on the Execute icon. HR_PA_310 Personnel Administration Actions 53 Recovering from an Interruption The Actions (0000) infotype will appear. 5. Click on the Execute info group button in the Application Toolbar. If this Information window appears, click on the Continue icon. Nothing will be deleted! HR_PA_310 Personnel Administration Actions

54 Recovering from an Interruption 6. Click on the Continue button on the Execute info group window. The Change Personal Data (0002) infotype will appear. 7. Click on the Next Record icon for each infotype previously completed and saved until you reach the infotype where you need to resume. Be sure to save any changes you might make to an infotype that was previously completed and saved before the interruption! 8. Complete the remaining infotypes as originally instructed until the PA Action is completed. HR_PA_310 Personnel Administration Actions

55 Unit 1 Check for Understanding HR_PA_310 Personnel Administration Actions 56 HR_PA_310 Unit 1 PROPERTIES On passing, 'Finish' button: On failing, 'Finish' button: Allow user to leave quiz: User may view slides after quiz: User may attempt quiz: Goes to Next Slide Goes to Previous Slide After user has completed quiz At any time Unlimited times

Unit 2 Additional PA Action Infotypes HR_PA_310 Personnel Administration Actions 58 Unit Overview The purpose of this unit is to give information and instructions for completing some additional infotypes that: will appear for certain New Hire Actions; and may or may not appear when delimiting an employees assignment or processing other various Actions. HR_PA_310 Personnel Administration Actions 59

Contract Elements (0016) Faculty Only This infotype will appear only for Faculty when processing the New Hire Action. Select the appropriate Contract Type, then click on the Save icon to complete this infotype and continue. HR_PA_310 Personnel Administration Actions 60 Hospital Salary (9002) Hospital Hire Only This infotype will appear for Hospital New Hires only. Leave the As of date field in the Employee

experience section blank. UKHC Payroll will fill in after the assignment has been completed. Select the appropriate Education degree for nurses only, then click on the Save icon to complete this infotype and continue. Contact UKHC Payroll with any questions. HR_PA_310 Personnel Administration Actions 61 Person: Change Profile - Hospital Hire Only

This screen will also appear for Hospital New Hires only. Just click on the Back icon to continue. HR_PA_310 Personnel Administration Actions 62 Main Personnel Assignment (0712) This infotype is used for anyone with concurrent employment. It is presented as display only for end users. The Benefits Office maintains this infotype if the main assignment needs to be changed.

Use the Next Record icon during an Action. to skip, should it appear HR_PA_310 Personnel Administration Actions 63 Faculty Salaries (9017) LOA with Pay This infotype will appear when processing a (Leave Of Absence) LOA with Pay Action to capture the original base salary of faculty members who are going on a leave of absence with partial pay.

Enter the faculty members annual salary that was effective prior to their leave of absence, then click on the Save icon. This infotype will not drive any payroll information, but will be used for Integrated Postsecondary Education Data System (IPEDS) reporting. NOTE: When processing the Return From Leave with Pay action, this infotype will be presented during the action to be delimited. HR_PA_310 Personnel Administration Actions 64 Cost Distribution (0027) This infotype may or may not appear when processing an Action that is ending a current assignment. The infotype lists the Cost Object(s) an employee is paid

from each pay period. To delimit this record, if applicable: Click on the gray selection box next to all lines to be delimited first, Then click on the Delimit icon. To not delimit any lines, click on the Next Record icon . HR_PA_310 Personnel Administration Actions 65 Recurring Payments/Deducts (0014)

This infotype may or may not appear when processing an Action that is ending a current assignment. This infotype will list two different Wage types: 2xxx Recurring payments made by the employees department (Incentives, Allowances, etc.) 4xxx Recurring deductions processed from outside the employees department (E permit, United Way, UKFCU, etc.) Delimit all wage type items when processing a Separation Action! To delimit, if applicable: 1. Click on the gray selection box next to all lines to be delimited first; 2. Then click on the Delimit icon. HR_PA_310 Personnel Administration Actions

66 Unit 3 Payroll Authorization Record (PAR) HR_PA_310 Personnel Administration Actions 67 Payroll Authorization Record (PAR) A PAR is the paperwork (report) summarizing the data entered during a PA Action. Processing a PAR is required at the conclusion of all PA Actions, except the Separation Action. For the Separation Action, send the completed Separation Form to HR Compensation. The form is located at:

http://www.uky.edu/HR/employ/documents/sepsheet.pdf The original, signed PAR and one (1) copy must be sent to HR Compensation. Also, the original of all appropriate, supporting documentation (i.e. I-9 form, W4/K4 forms, Direct Deposit form, Salary Recommendation Form, etc.) must be attached to the original, signed PAR. The second PAR is sent by itself. HR_PA_310 Personnel Administration Actions 68 Generating a PAR 1. Enter the transaction code ZHR_PAR. 2. Enter the Key Date, which must be the same as the Start date entered in PA40. 3. Enter the employees Personnel Number. 4. Enter your contact information and any other

Comments as needed. (Comments do print on the PAR!) 5. Click the Execute icon. HR_PA_310 Personnel Administration Actions 69 Generating a PAR (Continued) To print the PAR from this dialog box: Click in the checkbox next to Print immediately Select the Number of Copies Click on the Print icon

Click on the Print preview button to review the PAR prior to printing. HR_PA_310 Personnel Administration Actions 70 PAR Print Preview After previewing the PAR for accuracy, click on the Print icon to print. You will receive a similar message in the Status Bar: HR_PA_310 Personnel Administration Actions

71 Saving a PAR (Optional) Although you can always view/print a PAR at any time using the ZHR_PAR transaction, you can save it to your computer if desired as follows: 1. Use the ZHR_PAR transaction and do a Print preview. 2. Select Goto List Display from the Menu Bar. The PAR will change to a different format. Do not print and send this format of the PAR to HR Compensation! HR_PA_310 Personnel Administration Actions 72 Saving a PAR (Optional)

(Continued) 3. Select System List Save Local File from the Menu Bar. 4. Select the unconverted format (system default), then click on the green, Continue icon. HR_PA_310 Personnel Administration Actions 73 Saving a PAR (Optional) (Continued) 5. To change the Directory location, click on the Possible Entries icon. 6. Select the desired location in the Save in field. 7. Enter a File name. 8. Click on the Save button.

HR_PA_310 Personnel Administration Actions 74 Saving a PAR (Optional) (Continued) 9. Click on the Generate button. The system will display a similar message in the Status Bar, confirming the saving of the PAR. HR_PA_310 Personnel Administration Actions 75 Unit 3 Check for Understanding HR_PA_310 Personnel Administration Actions

76 HR_PA_310 Unit 3 PROPERTIES On passing, 'Finish' button: On failing, 'Finish' button: Allow user to leave quiz: User may view slides after quiz: User may attempt quiz: Goes to Next Slide Goes to Previous Slide After user has completed quiz At any time Unlimited times Course Summary HR_PA_310 Personnel Administration Actions 78

Course Summary Departmental Business Officers and Personnel Administrators are responsible for processing PA Actions in SAP/IRIS. Transaction PA40 is used for processing PA Actions. Transaction ZHR_PAR is used to generate the Payroll Authorization Record (PAR). HR_PA_310 Personnel Administration Actions 79 PA Actions Help Web Sites

myHelp-HR & Payroll Help web site: http://myHelp.uky.edu/rwd/HTML/HR.html Contains Quick Reference Cards, updated and printable course manuals, HR/Payroll Frequently Asked Questions, a link to the HR/Payroll Reference Manual, etc. IRIS-HR web site: http://www.uky.edu/IRIS/HR/ Contains the HR/Payroll Reference Manual, IRIS HR/Payroll Forms, access to the IRIS Payroll Schedules, etc. HR_PA_310 Personnel Administration Actions 80 PA Actions Practice Guide

The PA Actions Practice Guide is not a requirement for completing this course. However, we strongly recommend that you go through each exercise to familiarize yourself with a few of the key PA Actions and the PAR transaction prior to completing the PA Actions Assessment. The exercises are to be performed in the Training Sandbox. Please wait until you have completed and confirmed participation for this course before going through the PA Actions Practice Guide! HR_PA_310 Personnel Administration Actions 81 PA Actions Assessment

The PA Actions Assessment is a requirement for completing and receiving credit for this course. You will process five Actions, generate and save a PAR for each, then send the PARs to [email protected] for review. You will receive a confirmation e-mail after your assessment has been reviewed. Upon passing the Assessment, you will see a booking in your myTraining Activities transcript for HR_PA_315 PA Actions Assessment. Please wait until you have completed and confirmed participation for this course before going through the PA Actions Assessment! HR_PA_310 Personnel Administration Actions 82 PA Actions Practice Guide & Assessment

To access and print these documents: 1. Click on the Attachments link ( upper-right corner of this screen ) in the 2. Click on the PA Actions Practice Guide/PA Actions Assessment links (the documents will open in a separate browser window) 3. Print the documents 4. Close the separate browser window(s) 5. Close the Attachments window by clicking on the x in the upper-right corner of the window or by clicking on the OK button HR_PA_310 Personnel Administration Actions 83 PA Actions Data Sheet

In order to complete the exercises in both the PA Actions Practice Guide and the PA Actions Assessment, you must obtain a PA Actions Data Sheet from IRIS Training. The Data Sheet contains values that must be entered in certain fields when going through the exercises. To obtain the Data Sheet: Send an e-mail to [email protected] Enter PA Actions Data Sheet Request in the Subject line HR_PA_310 Personnel Administration Actions 84 Confirm Participation

You are now on the last slide for this course, and you must confirm participation as follows: 1. Click on the Log off button in the lower-right corner of this screen (You will be returned to the main myTraining page for this course.) 2. Allow the myTraining page a few seconds to refresh and display the Confirm Participation section 3. Click on the Confirm Participation link 4. Click on the OK button HR_PA_310 Personnel Administration Actions 85

Recently Viewed Presentations

  • Q-G Theory: Using the Q Vector

    Q-G Theory: Using the Q Vector

    Through the QG omega equation, the divergence of Q can be used to diagnose the forcing for vertical motion. One partitioning of the Q-vector yields Qn and Qs. Qn is the component of the Q-vector normal to the local orientation...
  • Revitalizing Connecticuts Brownfields Tim Sullivan, Director of Waterfront,

    Revitalizing Connecticuts Brownfields Tim Sullivan, Director of Waterfront,

    On May 15, Governor Malloy announced that DECD is accepting applications for up to $20m of . brownfield. funding. Largest-ever round of Connecticut brownfield funding. Application, Ranking and Review grid and Notice of Funding Availability are available at . www.ctbrownfields.gov....
  • Apresentação do PowerPoint

    Apresentação do PowerPoint

    Tal fato não pode ser considerado sinistro porque não guarda relação inerente e direta com a atividade empresarial da tomadora, já que, no ordenamento pátrio (art. 104 CC/15), todo negócio jurídico deve ter objeto lícito e forma prescrita ou não...
  • Malaria Prevention and Control : An Example of Uganda ...

    Malaria Prevention and Control : An Example of Uganda ...

    Arial Calibri Constantia Wingdings 2 Flow 1_Flow 2_Flow 3_Flow Malaria Prevention and Control : An Example of Uganda National Academy of Sciences in Action Presentation compiled by Outline of presentation Slide 4 The national context Slide 6 The national context...
  • Domain Network Coherence - Purdue University

    Domain Network Coherence - Purdue University

    Molybdate ion transport regulates various processes directly Mo-molybdopterin cofactor biosynthesis, oligopeptide transport, cytochrome complex assembly It regulates various other processes indirectly Through DNA-dependent regulation of transcription, two-component signal transduction system, nitrate assimilation Direct regulation of these ...
  • Genigraphics Research Poster Template 36x48

    Genigraphics Research Poster Template 36x48

    Cara Buchanan, BA, Newton Kendig, MD. George Washington University School of Medicine and Health Sciences. In 2017, the authors began to explore ways to introduce justice-health content into medical education.
  • How Do We Classify Matter?

    How Do We Classify Matter?

    physical ways TO SEPARATE MIXTURES: NOTCHEMICALLY SEPARATED BY DOING CHEMICAL REACTIONS BREAKING ELECTRON BONDS. SIFTING (2 different-sized solids) MAGNETICS. FILTRATION (solid from a liquid) EVAPORATION (solute from a solvent
  • Presentation Title Presentation Subtitle

    Presentation Title Presentation Subtitle

    Steps in chemical machining. The four steps in chemical machining are as follows: Cleaning. The first step is a cleaning operation to ensure that material will be removed uniformly from the surfaces to be etched. Masking. A protective coating called...