G. Schlag / STO-GM / Novembre 2012 ABB

G. Schlag / STO-GM / Novembre 2012 ABB STOTZ-KONTAKT GmbH ABB i-bus KNX DLR/A 4.8.1.1 DALI Light Controller SM STO/G - Slide 1 DALI Light Controller - surface mounting Market Requirements NEW STO/G Slide 2 Customers needs for decentralized installation KNX environments The existing surface mounting range as RC/A (Room Controller) and AE/A (Analogue Input) has found great acceptance in the market The main installation location is the false ceiling and wall mounting

Features like flexibility, extendibility, robust technology (IP 54), flat design, quick and simple installation are significant marketing features for surface mounting range Missed are a KNX DALI surface mounting device to link KNX with small DALI areas used e.g. in 1 or 4 office rooms DALI Light Controller - surface mounting System Description KNX/DALI Light Controller, surface mounting with 4 independent Light Sensor Inputs and one DALI Control Line for 8 DALI Groups consisting of maximal 64 DALI Devices. optional Presence Detection 1 up to 4 Light Sensors LF/U 2.1 DALI - Ballast DLR/S

DALI - Ballast DALI KNX 164 ballasts 8 groups DALI DALI - Ballast Handled by KNX STO/G Slide 3 KNX DALI Light Controller - surface mounting Hardware STO/G Slide 4 DLR/A 4.8.1.1 ABB i-bus KNX

Surface mounting design 134 x 189 x 50 (H x B x T) Enclosure IP54 64 DALI devices (type 0) acc. IEC 62386-101 8 DALI groups, 4 light controlled Gateway operating voltage 240 V AC/DC Power supply

Housing based on RC/A Room Controller 110 DALI Light Controller - surface mounting Input / Output Terminals STO/G Slide 5 DLR/A 4.8.1.1 1 DALI output acc. IEC 62386 (2 x 2 terminals) 1 KNX acc. EN 50090 (1 x 2 terminals) 4 Sensor input LF/U 2.1 (4 x 2 terminals)

Gateway operating voltage (2 x 3 terminals 16A) DALI Ballast operating voltage (2 x 3 terminals 6A) Electronic layout based on DLR/S 8.16.1M DALI Light Controller - surface mounting Technical Data Light Sensor STO/G Slide 6 Light sensor LF/U 2.1 Same sensor as for LR/S x.16.1 or DLR/S 8.16.1M 2 core shielded sensor cable

Cable length max. 100m Optional presence detection via separate KNX presence detector e.g. BJE 6131 DALI Light Controller - surface mounting Software functions Same function and application program as DLR/S 8.16.1M however for 8 Lighting groups and 4 controller Per group Light controller - max. 4 groups Slave Staircase

(can be combined with constant light control) Switching, Dimming, Brightness value Separate objects for status brightness value and switching One object for fault message (ballast or lamp failure, both together) STO/G Slide 7 DALI Light Controller - surface mounting Further Functions Same function and application program as DLR/S 8.16.1M however for 8 Lighting groups and 4 controller 14 Light scenes

Reaction in case of KNX and DALI failure and recovery parametrizable Burn in mode (each group) Dimming speed changeable via KNX Characteristic curve adjustment to STO/G Slide 8 mask out no dimming area Supplementary fault messages with object diagnosis Number of faulty devices / groups Address

of faulty devices / groups DALI Light Controller - surface mounting Tool for commissioning Software Tool for commissioning (Same as DLR/S 8.16.1M however for 8 Lighting groups and 4 controller) DALI device and group addressing Adjust STO/G Slide 9 constant light control STO/G Slide 10